Filter
Top Products
IPv6 Interface Commands
60-20
60
clear ipv6 traffic
This command resets IPv6 traffic counters.
Command Mode
Privileged Exec
Command Usage
This command resets all of the counters displayed by the show ip traffic
command.
Example
UDP Statistics
input The total number of UDP datagrams delivered to UDP users.
checksum errors The total number of UDP packet checksum errors.
length errors The total number of UDP header length errors.
no port The total number of received UDP datagrams for which there was no application
at the destination port.
dropped The number of times the system encounter an error when trying to queue the
received packet.
output The total number of UDP datagrams sent from this entity.
TCP Statistics
input The total number of segments received, including those received in error. This
count includes segments received on currently established connections.
checksum errors The total number of TCP packet checksum errors.
output The total number of segments sent, including those on current connections but
excluding those containing only retransmitted octets.
retransmitted The total number of segments retransmitted - that is, the number of TCP segments
transmitted containing one or more previously transmitted octets.
Console#clear ipv6 traffic
Console#
Table 60-4 show ipv6 traffic - display description
Field Description