Filter
Top Products
Configuring the Switch
3-8
3
IP DSCP Priority Sets IP Differentiated Services Code Point priority, mapping a
DSCP tag to a class-of-service value
26-9
IP Port Priority Status Globally enables or disables IP Port Priority 26-11
IP Port Priority Sets TCP/UDP port priority, defining the socket number and
associated class-of-service value
26-11
QoS 27-1
DiffServ Configure QoS classification criteria and service policies 27-1
Class Map Creates a class map for a type of traffic 27-1
Policy Map Creates a policy map for multiple interfaces 27-4
Service Policy Applies a policy map defined to an ingress port 27-7
IGMP Snooping 28-1
IGMP Configuration Enables multicast filtering; configures parameters for multicast
query
28-2
Multicast Router
Port Information
Displays the ports that are attached to a neighboring multicast
router for each VLAN ID
28-4
Static Multicast Router
Port Configuration
Assigns ports that are attached to a neighboring multicast router 28-5
IP Multicast Registration
Table
Displays all multicast groups active on this switch, including
multicast IP addresses and VLAN ID
28-6
IGMP Member Port Table Indicates multicast addresses associated with the selected
VLAN
28-7
DNS 29-1
General Configuration Enables DNS; configures domain name and domain list; and
specifies IP address of name servers for dynamic lookup
29-1
Static Host Table Configures static entries for domain name to address mapping 29-3
Cache Displays cache entries discovered by designated name servers 29-5
Cluster 30-1
Configuration Globally enables clustering for the switch 30-1
Member Configuration Adds switch Members to the cluster 30-2
Member Information Displays cluster Member switch information 30-3
Candidate Information Displays network Candidate switch information 30-4
Table 3-2 Switch Main Menu (Continued)
Menu Description Page