Filter
Top Products
Navigating the Web Browser Interface
3-7
3
Port Configuration Configures port settings for a specified MST instance 22-19
Trunk Configuration Configures trunk settings for a specified MST instance 22-19
VLAN 23-1
802.1Q VLAN
GVRP Status Enables GVRP VLAN registration protocol 23-4
802.1Q Tunnel Status Enables QinQ tunneling mode 23-16
Basic Information Displays information on the VLAN type supported by this switch 23-4
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
23-5
Static List Used to create or remove VLAN groups 23-6
Static Table Modifies the settings for an existing VLAN 23-7
Static Membership by Port Configures membership type for interfaces, including tagged,
untagged or forbidden
23-9
Port Configuration Specifies default PVID and VLAN attributes 23-10
Trunk Configuration Specifies default trunk VID and VLAN attributes 23-10
Tunnel Configuration Adds ports to a QinQ tunnel 23-17
Tunnel Trunk Configuration Adds trunks to a QinQ tunnel 23-17
Private VLAN
Status Enables or disables the private VLAN 24-1
Link Status Configures the private VLAN 24-2
Protocol VLAN
Configuration Creates a protocol group, specifying the supported protocols 25-1
Port Configuration Maps a protocol group to a VLAN 25-2
Priority 26-1
Default Port Priority Sets the default priority for each port 26-1
Default Trunk Priority Sets the default priority for each trunk 26-1
Traffic Classes Maps IEEE 802.1p priority tags to output queues 26-3
Traffic Classes Status Enables/disables traffic class priorities (not implemented) NA
Queue Mode Sets queue mode to strict priority or Weighted Round-Robin 26-4
Queue Scheduling Configures Weighted Round Robin queueing 26-5
IP Precedence/
DSCP Priority Status
Globally selects IP Precedence or DSCP Priority, or disables
both.
26-7
IP Precedence Priority Sets IP Type of Service priority, mapping the precedence tag to
a class-of-service value
26-8
Table 3-2 Switch Main Menu (Continued)
Menu Description Page