ADC 700F Network Card User Manual


 
Chapter 3: Installing the Modem
Megabit Modem 400F, 500L, 600F, and 700F User Manual 19
1 After you have set the MDI/MDI-X switch to the correct position, connect the black cable
from the modem 10/100BASE-T port to your PC or hub.
2 Connect the grey phone cord from the modem ADSL port to the ADSL wall jack. If your
installation requires a splitter or microfilter, refer to the manufacturers documentation for
further instructions.
3 Connect the power cable from the modem power connector to a power outlet.
If you need pinouts for the ADSL and 10/100BASE-T connectors, see Connector Pinouts on
page 101. For information on how to use the RS-232 management port for maintenance, see
Using the RS-232 Management Port on page 80.