ADC 700F Network Card User Manual


 
Chapter 4: Setting Up For Configuration
Megabit Modem 400F, 500L, 600F, and 700F User Manual 33
Listed in the table below are the default values for the Megabit Modem in Bridge/Router mode.
Reference this table to learn the values assigned to the modem after resetting it to factory
default.
Parameter Default Value Parameter Default Value
Bridge/Router RFC 1483
Brouter WAN Configuration Not selected Spanning Tree Selected
Service Name blank field Brouter LAN Configuration
ATM VPI 0 Bridging Enabled
ATM VCI 100 Port Priority 100
Bridging Enabled Routing Disabled
Port Priority 101 RIP Direction Both
Routing Disabled RIP Version Rip1
RIP Direction Both IP Address 192.168.0.1
RIP Version Rip1 IP Net Mask 255.255.255.0
IP Address 0.0.0.0 Default gateway IP Address 192.168.0.1
IP Net Mask 0.0.0.0 Default gateway IP Net Mask 255.255.255.0
Encapsulation LLC DHCP Not enabled
Static Mac Address Entry all zeros Start IP Address 192.168.0.2
MAC Address 0:0:0:0:0:0 End IP Address 192.168.1.1
Source Port 0 Primary DNS 192.168.0.1
Dest Port 0 Gateway 192.168.0.1
Static Route Entry
(IP Address, IP Network Mask,
Gateway IP Address)
0.0.0.0