Filter
Top Products
Saving the Configuration
32 Megabit Modem 400F, 500L, 600F, and 700F User Manual
Listed in the table below are the default values for the Megabit Modem in PPP over ATM mode.
Reference this table to learn the values assigned to the modem after resetting it to factory
default.
Parameter Default Value Parameter Default Value
System Setup
System Mode PPP over ATM SNMP parameters
TFTP parameters Enable trap sending Not enabled
TFTP Server IP Address 192.168.0.2 Trap Server IP Address 0.0.0.0
TFTP Server Net Mask 255.255.255.0 Trap Server Net Mask 255.255.255.0
TFTP Server Path blank field Trap Community String public
File Name tiger.bin Get Community String public
Admin IP Address 0.0.0.0 Set Community String private
PPP Over ATM
PPP Over ATM WAN Configuration PPP Over ATM LAN Configuration
Service Name blank field IP Address 192.168.0.1
ATM VPI 0 IP Net Mask 255.255.255.0
ATM VCI 100 DHCP Enabled
Login Name blank field Start DHCP IP Address 192.168.0.2
Login Password blank field End DHCP IP Address 192.168.1.1
Chap Host blank field Primary DNS 192.168.0.1
Address Translation Enabled Gateway 192.168.0.1
Address Assignment Dynamic Static NAT Entries (private, proxy, and remote)
IP Address 0.0.0.0 IP Addresses 0.0.0.0
User Assignments (for PPP WAN) Ports 0
Service Name blank field Protocol UDP
User’s IP Address 0.0.0.0