Filter
Top Products
Chapter 7: Configuring Bridging/Routing Sessions
Megabit Modem 400F, 500L, 600F, and 700F User Manual 71
ACTIVATING AND DEACTIVATING SESSIONS
Activate sessions as you want to use them. Also, you may want to de-activate some sessions,
while leaving other sessions active. Follow one of the two methods below to activate and
deactivate sessions.
From the WAN Connections window:
1 From the
wan menu, click
connections to open the
WAN Connections
window.
2 Select the sessions you
want active then click
Connect. The modem sets
up the session with the
service provider.
3 When dynamically
acquiring an IP address
from the service provider,
the session receives the
IP address at this time.
From the Brouter WAN Port Configuration window:
1 From the
wan menu, click connections to
open the WAN Connections window.
2 Click Edit on the box adjacent to the session
to activate or deactivate.
3 To activate the session, place a checkmark
in the
Session Enable box by clicking in it.
To deactivate the session, clear the
checkmark.
4 Click
OK to accept the changes.