Filter
Top Products
Activating and Deactivating Sessions
62 Megabit Modem 400F, 500L, 600F, and 700F User Manual
ACTIVATING AND DEACTIVATING SESSIONS
Activate sessions as you want to use them. Also, you may want to de-activate some sessions,
while leaving other sessions active. Follow one of the two methods to activate and deactivate
sessions.
From the WAN Connections window:
1 From the
wan menu, click
connections to open the
WAN Connections
window.
2 Select the sessions you
want active then click
Connect. The modem sets
up the session with the
service provider.
3 When dynamically
acquiring an IP address
from the service provider,
the session receives the
IP address at this time.
From the Brouter WAN Port Configuration window:
1 From the
wan menu, click connections to
open the WAN Connections window.
2 Click Edit on the box adjacent to the session
to activate or deactivate.
3 To activate the session, place a checkmark
in the
Session Enable box by clicking in it.
To deactivate the session, clear the
checkmark.
4 Click
OK to accept the changes.