Filter
Top Products
Configuring the WAN Bridging/Routing Sessions
66 Megabit Modem 400F, 500L, 600F, and 700F User Manual
Add a Bridging/Routing WAN Session
You add a bridging/routing WAN session in the WAN Port Configuration window. Use the
following reference table and procedure to set up a session.
Information Description
Service Name A unique descriptive identifier of the session that also displays in the connection
field.
ATM VPI Virtual Path Identifier (VPI) identifies the virtual path that transports ATM cells in a
virtual Channel. The range of values is 0 to 15.
ATM VCI Virtual Channel Idenifier (VCI) identifies a virtual channel for each session (each
session is a virtual channel). Can be a number from 32 up to a maximum of 253 (on
VPI 0, VDIs 254 and 255 are reserved), with the first 32 (0 through 31) reserved.
Bridging The function of filtering/forwarding frames based on layer 2 headers.
Enable Enables/Disables bridging.
Port Priority The priority of the WAN port.
Routing The function of routing packets based on layer 3 headers.
Enable Enables/Disables routing.
IP Address The IP address of the modem's WAN port.
IP Net Mask The IP Net Mask address of the modem's WAN port.
RIP Direction The direction the RIP routing information flows.
RIP Version The version of the RIP protocol.