ADC 700F Network Card User Manual


 
Defining Static NAT Entries
40 Megabit Modem 400F, 500L, 600F, and 700F User Manual
DEFINING STATIC NAT ENTRIES
Static NAT entries are used in PPP Over ATM mode. They are required only for applications
that use TCP/UDP connections initiated from the remote end (WAN). Through the
Static NAT
Table
, you can map inbound traffic from a remote user to a user or a logical port on your LAN.
You can enter a maximum of 32 static NAT entries. See page 87 for more information on NAT
and an example application.
1 From the
system menu, click static NAT table to open the Static NAT Table window.