Filter
Top Products
Chapter 6: Configuring PPP Sessions
Megabit Modem 400F, 500L, 600F, and 700F User Manual 59
2 Enter the IP address and the Net Mask.
3 Click on the box adjacent to the letters DHCP. A check mark in the box indicates the
modem's DHCP server is enabled. No check mark in the box indicates the modem's DHCP
server is not enabled.
4 Click
Apply.
Saving the Configuration
Although you have submitted your new system settings, the parameters are not permanent
until you write them to NVRAM. See “Saving the Configuration” on page 28 when you want
to save to NVRAM.