ADC 700F Network Card User Manual


 
Configuring Static Routes
44 Megabit Modem 400F, 500L, 600F, and 700F User Manual
CONFIGURING STATIC ROUTES
Display Static Routes
1 From the system menu, click static route table to open the Static Route Table window.
2 Observe the list of static routes.
Add a Static Route
1 From the system menu, click static route table to open the Static Route Table window.
2 Click
Add to display the Static Route Entry window.
3 Configure the static route parameters as defined above.
4 Click
Apply to add the new data to the list.
Modify a Static Route
1 From the system menu, click static route table to open the Static Route Table window.
2 Click
Select of the route to be changed.
3 Configure the static route parameters as defined above.
4 Click
OK to change the existing data to the list.
Information Description
Destination The destination IP address of the packet.
Net Mask The destination subnet mask of the packet.
Gateway The next hop IP address the packet will be forwarded to.