Filter
Top Products
Managing CMM Directory Content Managing the Directory Structure (Non-Redundant)
OmniSwitch 6600 Family Switch Management Guide March 2005 page 4-23
Show Switch Files
The files currently installed on a switch can be viewed using the show microcode command. This
command displays the files currently in the specified directory.
To display files, enter the command with a directory, as shown:
-> show microcode certified
Package Release Size Description
-----------------+----------------------+--------+-----------------------------
Fadvrout.img 5.1.1.56 685419 Advanced Routing
Fbase.img 5.1.1.56 2904203 Base Software
Fdiag.img 5.1.1.56 228100 Diagnostics Archive
Feni.img 5.1.1.56 748469 NI Software
Fl2eth.img 5.1.1.56 613584 Layer 2, Ethernet
Fos.img 5.1.1.56 887110 Operating System
Fqos.img 5.1.1.56 239900 Quality of Service
Frout.img 5.1.1.56 474885 Routing
Fsecu.img 5.1.1.56 128563 Security
Fweb.img 5.1.1.56 835209 Webview - Main
Fwebadvrout.img 5.1.1.56 180919 Webview - Advanced Routing
Fwebl2eth.img 5.1.1.56 175158 Webview - Layer 2 and Etherne
Fwebqos.img 5.1.1.56 110179 Webview - Quality of Service
Fwebrout.img 5.1.1.56 187654 Webview - Routing
Fwebsecu.img 5.1.1.56 96908 Webview - Security
If no directory is specified, the files that have been loaded into the running configuration are shown.
To display the date when the archive was last updated, enter the show microcode command with the
history keyword, as shown:
-> show microcode history
Archive Created 10/1/01 6:49:34