Filter
Top Products
NTP Specifications Configuring Network Time Protocol (NTP)
page 3-2 OmniSwitch 6600 Family Switch Management Guide March 2005
NTP Specifications
NTP Defaults Table
The following table shows the default settings of the configurable NTP parameters.
NTP Defaults
RFCs supported 1305–Network Time Protocol
Maximum number of NTP servers per client 3
Parameter Description Command Default Value/Comments
Specifies an NTP server from which
this switch will receive updates.
ntp server version: 4
minpoll: 6
prefer: no
key: 0
Used to activate client ntp client disabled
Used to activate NTP client broad-
cast mode
ntp broadcast disabled
Used to set the advertised broadcast
delay, in microseconds.
ntp broadcast-delay 4000 microseconds