Filter
Top Products
Quick Steps for Setting Up ASA Managing Switch Security
page 8-8 OmniSwitch 6600 Family Switch Management Guide March 2005
The order of the server names is important here as well. In this example, the switch will use ldap2 for
logging switch access sessions. If ldap2 becomes unavailable, the switch will use the local Switch
Logging facility. For more information about Switch Logging, see the OmniSwitch 6600 Family Network
Configuration Guide.
Note. To verify the switch access setup, enter the show aaa authentication command. The display is
similar to the one shown here:
Service type = Default
1rst authentication server = rad1
2nd authentication server = local
Service type = Console
Authentication = Use Default ,
1rst authentication server = rad1
2nd authentication server = local
Service type = Telnet
Authentication = Use Default,
1rst authentication server = rad1
2nd authentication server = local
Service type = Ftp
Authentication = Use Default,
1rst authentication server = rad1
2nd authentication server = local
Service type = Http
Authentication = denied
Service type = Snmp
Authentication = Use Default,
1rst authentication server = rad1
2nd authentication server = local
Service type = Ssh
Authentication = Use Default,
1rst authentication server = rad1
2nd authentication server = local
For more information about this command, see the OmniSwitch CLI Reference Guide.