Filter
Top Products
Managing CMM Directory Content Managing Redundancy in a Stack
OmniSwitch 6600 Family Switch Management Guide March 2005 page 4-29
The command returns the directory the switch is currently running from (working or certified) and which-
CMM is currently controlling the switch (primary or secondary). It also displays whether the working and
certified directories are the same, and if a synchronization is needed between the primary and secondary-
CMM. In addition, the command output displays how many modules in the stack will be reloaded in the
event of a management module takeover. Options include NONE, ALL, or a list of specific modules.
Refer to the section below for additional information on stack module behavior during a redundant CMM
takeover.
The show running-directory command is described in detail in the OmniSwitch CLI Reference Guide.