Filter
Top Products
File and Directory Management Managing System Files
page 2-18 OmniSwitch 6600 Family Switch Management Guide March 2005
Press Enter to skip repairing files, or enter yes to start file repair. If you enter yes, the screen displays simi-
lar to the following:
/flash/ - disk check in progress ...
/flash/ - Volume is OK
total # of clusters: 14,773
# of free clusters: 9,621
# of bad clusters: 0
total free space: 19,242 Kb
max contiguous free space: 7,454,720 bytes
# of files: 28
# of folders: 4
total bytes in files: 10,262 Kb
# of lost chains: 0
total bytes in lost chains: 0
Deleting the Entire File System
The newfs command deletes the flash file system and all the files and directories contained in it. This
command is used when you want to reload all files in the file system.
Caution. This command will delete all of the switch’s system files. All configurations programmed into
the switch will be lost. Do not use this command unless you are prepared to reload all files.