Filter
Top Products
1965
G
W
Chapter 4: Cabling the Network Ports
108
3. Connect the other end of the power cord to an appropriate AC power
outlet. For power specifications for the switch, refer to “Power
Specifications” on page 123.
Note
For countries that require 100-125 VAC installations, the power cord
plug provided with the AT-PWR1200 power supply has a 20 Amp,
125 V NEMA 5-20P plug. This plug is only compatible with a NEMA
5-20R receptacle. See Figure 76.
Figure 76. 100-125 VAC 125 V NEMA 5-20 Plug and Receptacle
Warning
This unit might have more than one power supply. To reduce the risk
of electric shock, disconnect all power cords before servicing the
unit.
E30
4. Start a local management session on the unit by performing the next
procedure.