Filter
Top Products
AMD Confidential
User Manual September 12
h
, 2008
180 Chapter 15: Frequently Asked Questions (FAQ)
Why doesn’t the simulated Operating System correctly recognize the DVD/CD after I
changed the DVD/CD image?
When changing DVD/CD images clear the old image, allow the simulation to run for a
couple of seconds, and then set the new image. This gives the Operating System a chance
to see that the DVD-/CD-ROM is "not ready", and it more correctly detects that the
DVD/CD image has changed. For example:
<press "Stop" button>
1 simnow>ide:1.image 0 off
<press "go" button>
<wait 5 seconds>
<press "Stop" button>
1 simnow>ide:1.image 0 c:\fc3-x86_64-disc2.iso
The serial connection to Microsoft’s KLernel Debugger seems to be unstable. What
can I do?
See Section 11.1, "Kernel Debugger", on page 151.
How can I obtain the full release version of the simulator?
See Section 1, “Overview”, on page 1.
Why doesn’t the OS find a connected USB device?
The USB port may not be soft-enabled. For example to soft-enable USB port:
1 simnow> usb:0.Port enable 0