AMD 4.4.4 Network Router User Manual


 
AMD Confidential
User Manual September 12
h
, 2008
252 Appendix A
Automation Command
Description
xtrlogfile <filename.log>
Sets name of the log file where XTR
messages should be logged. This is
optional and if not used the log is directed
to the simulators log.
status
Displays the status of XTR playback
1 simnow> xtrsvc.usage
Automation Command
Description
xtrenable <0|1>
Enables (1) or Disables (0) XTR Record.
All other values are invalid.
xtrfile <filename.xml>
Sets the XTR-XML file for XTR Record.
XTRMemBits n
Sets number of bits for memory address
bits to scan. n= 16, 32 or 48. Default is 32.
Xtrstatus
Displays the status of XTR Record.
A.7.29 ATI SB400/SB600/SB700
1 simnow> sb600.usage
Automation Command
Description
HtInterrupts (0|1)
Enables (1) or disables (0) HyperTransport interrupts.
HtIntStatus
Returns enabled if HyperTransport interrupts are
enabled; otherwise it returns disabled‟.
IoLog (0|1)
Enables (1) or disables (0) IO logging.
IoLogStatus
Returns „enabled‟ if IO Logging is enabled; otherwise it
returns „disabled‟.
MemLog (0|1)
Enables (1) or disables (0) IO logging.
MemLogStatus
Returns enabled if Memory Logging is enabled;
otherwise it returns „disabled‟.
SmiSciLog (0|1)
Enables (1) or disables (0) IO logging.
SmiSciLogStatus
Returns enabled if SMI SCI Logging is enabled;
otherwise it returns „disabled‟.
Version
Displays the binary revision of the RD790 model.
SetPciIrqMap {BasePciIrq(0-3)}
{ChipPciIrq(0-7)}
Depending on platform configuration, it maps base
PCIIRQ#A/B/C/D (0-3) from PCI bridge to ATI chip
internal PCIIRQ#A/B/C/D/E/F/G/H (0-7).
GetPciIrqMap {BasePciIrq(0-3)}
Returns the ATI chip internal
PCIIRQ#A/B/C/D/E/F/G/H (0-7) which the specific
base PCIIRQ#A/B/C/D(0-3) is mapped to.
GetPciIrqTotal
Returns the total number of chip internal PCIIRQs.
A.7.30 ATI RS480
1 simnow> rs780.usage