Filter
Top Products
AMD Confidential
User Manual September 12
h
, 2008
222 Appendix A
Instruction
Supported
Mnemonic
Opcode
Description
LAR reg64,reg/mem16
0F 02 /r
Reads the GDT/LDT descriptor referenced by
the 16-bit source operand, masks the
attributes with 00FFFF00h and saves the
result in the 64-bit destination register.
LGDT mem16:32
0F 01 /2
Loads mem16:32 into the global descriptor
table register.
LGDT mem16:64
0F 01 /2
Loads mem16:64 into the global descriptor
table register.
LIDT mem16:32
0F 01 /3
Loads mem16:32 into the interrupt descriptor
table register.
LIDT mem16:64
0F 01 /3
Loads mem16:64 into the interrupt descriptor
table register.
LLDT reg/mem16
0F 00 /2
Load the 16-bit segment selector into the
local descriptor table register and load the
LDT descriptor from the GDT.
LMSW reg/mem16
0F 01 /6
Loads the lower 4 bits of the source into
the lower 4 bits of CR0.
LSL reg16,reg/mem16
0F 03 /r
Loads a 16-bit general-purpose register with
the segment limit or a selector specified in
a 16-bit memory or register operand.
LSL reg32,reg/mem16
0F 03 /r
Loads a 32-bit general-purpose register with
the segment limit or a selector specified in
a 16-bit memory or register operand.
LSL reg64,reg/mem16
0F 03 /r
Loads a 64-bit general-purpose register with
the segment limit or a selector specified in
a 16-bit memory or register operand.
LTR reg/mem16
0F 00 /3
Load the 16-bit segment selector into the
task register and load the TSS descriptor
from the GDT.
MOV CRn,reg32
0F 22 /r
Move the contents of a 32-bit register to
CRn.
MOV CRn,reg64
0F 22 /r
Move the contents of a 64-bit register to
CRn.
MOV reg32,CRn
0F 20 /r
Move the contents of CRn to a 32-bit
register.
MOV reg64,CRn
0F 20 /r
Move the contents of CRn to a 64-bit
register.
MOV DRn,reg32
0F 21 /r
Move the contents of a 32-bit register to
DRn.
MOV DRn,reg64
0F 21 /r
Move the contents of a 64-bit register to
DRn.
MOV reg32,DRn
0F 23 /r
Move the contents of DRn to a 32-bit
register.
MOV reg64,DRn
0F 23 /r
Move the contents of DRn to a 64-bit
register.
RDMSR
0F 32
Copy MSR specified by ECX into EDX:EAX.
RDPMC
0F 33
Copy the performance monitor counter
specified by ECX into EDX:EAX.
RDTSC
0F 31
Copy the time-stamp counter into EDX:EAX.
RSM
0F AA
Resume operation of an interrupted program.
SGDT mem16:32
0F 01 /0
Store global descriptor table register to
memory.
SGDT mem16:64
0F 01 /0
Store global descriptor table register to
memory.
SIDT mem16:32
0F 01 /1
Store interrupt descriptor table register to
memory.
SIDT mem16:64
0F 01 /1
Store interrupt descriptor table register to
memory.
SLDT reg16
0F 00 /0
Store the segment selector from the local
descriptor table register to a 16-bit
register.
SLDT reg32
0F 00 /0
Store the segment selector from the local
descriptor table register to a 32-bit
register.
SLDT reg64
0F 00 /0
Store the segment selector from the local
descriptor table register to a 64-bit
register.
SLDT mem16
0F 00 /0
Store the segment selector from the local
descriptor table register to a 16-bit memory
location.
SMSW reg16
0F 01 /4
Store the low 16 bits of CR0 to a 16-bit
register.
SMSW reg32
0F 01 /4
Store the low 32 bits of CR0 to a 32-bit
register.