Filter
Top Products
NetLinx Security within the Web Server
56
NI-3101-SIG Signature Series NetLinx Integrated Controller
5. Select either the Control or Emulate option.
To Control a device means that the program generates messages which appear to a specified device
to have come from the Master. The options in this frame specify the <D:P:S> combination for the
device to be controlled.
To Emulate a device means that the program generates messages which appear to the Master to
have come from a specified <D:P:S> combination (real or fictitious). The options in this frame
specify the <D:P:S> combination for the device to be emulated.
Selecting this option adds a Push button with the Channel Code section of this page.
6. Enter a System Number, Device Number, and Port Number into the appropriate fields. These values
correspond to the device to be controlled, whether real or fictitious.
The Device, Port, and System value ranges are 1 - 65535.
7. Within the Channel Code section, enter a valid Channel number to emulate Channel messages (i.e., Push/
Release, CHON, and CHOFF) for the specified <D:P:S>.
The Channel number range is 1 - 65535.
8. Select the On or Off buttons to Emulate Channel ON (CHON) and Channel OFF (CHOFF) messages for
the specified <D:P:S>.
9. Select the Push button to Emulate a push/release on the channel specified. You can click and hold down
the Push button to see how the device/Master responds to the push message.
10. Within the Level Code section, enter a valid Level number and Level data value for the specified
<D:P:S> and press the Send button to transmit this data.
The Level number range is 1 - 65535.
The list below contains the valid Level data types and their ranges:
FIG. 47 Control/Emulate dialog