Filter
Top Products
NetLinx Security within the Web Server
80
NI-3101-SIG Signature Series NetLinx Integrated Controller
System Settings - Manage Other Devices - Dynamic Device
Discovery Pages
To access this page, click on the Manage Other Devices link (from within the System Settings section of the
Navigation frame). This page (FIG. 65) (within build 323 or higher) is used as the entry point for the
management of all 3rd party Dynamically Discovered Devices.
Before beginning to manage any other devices, the target Master must be loaded
with the program which defines the new devices and modules. In addition to this
code, all IP/Serial devices must be pre-configured and connected to the system.
FIG. 65 System Settings - Manage Other Devices page
Manage Other Devices Page
Feature Description
Dynamic Device Discovery links: These links direct the user to additional Dynamic Device
Discovery (DDD) configuration pages which include:
• Manage Device Bindings page is used for configuring
application-defined Duet virtual devices by using discovered
physical devices.
- If your current NetLinx program (running on the target
Master)
has been written, and you have notified the Master of a set of
Dynamic Devices on your system, you will then want to start
by managing those devices through this page.
• Create User Defined Device page provides a Web interface
used in creating and managing the values necessary to add a
dynamic physical device to the system. The devices added on
this page do not support the DDD beaconing technology.
- If after confirming the presence of your programmed
Dynamic Devices (provided to the Master via the NetLinx
code), and have allowed the Master to confirm the presence of
any other Dynamic Devices, manually enter those remaining
devices on the system via the UserDefined Device page.
Note: IR-controlled devices (such as a VCR or Receiver) must
always be User-Defined devices.
Links to additional
Shows loaded Duet Modules
DDD pages
DDD configuration settings
Registered configuration
links (optional)