Filter
Top Products
Firmware Pages and Descriptions
79
7" Modero Widescreen Touch Panels
Refer to the Step 3: Choose a Master Connection Mode section on page 43 for more detailed information
on using the System Settings page.
Wireless Settings Page
Use the options on the Wireless Settings page (FIG. 66) to configure communication settings for the
wireless CF card (802.11g), and read the device number assigned to the panel.
Features on this page include:
System Settings Page Elements (Cont.)
Master Connection (Cont.):
System Number Allows you to enter a system number. Default value is 0 (zero).
(ETHERNET Only - disabled when USB is selected)
Master IP/URL Sets the Master IP or URL of the NetLinx Master.
(ETHERNET Only - disabled when USB is selected)
Master Port Number Allows you to enter the port number used with the NetLinx Master.
• Default value is 1319. (ETHERNET Only - disabled when USB is selected)
Username/Password If the target Master has been previously secured, enter the alpha-numeric string
(into each field) assigned to a pre-configured user profile on the Master.
This profile should have the pre-defined level of access/configuration rights.
FIG. 66
Wireless Settings page (reads from and assigns values to the WAP)
Wireless Settings Page
Back: Saves all changes and returns to the previous page.
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.