Filter
Top Products
Reference Guide
data disk.s at any time during this process. (Com-
mand key B)
* SPECIFY (floppy disk systems only): ThinkTank
displays a menu of the drives that may contain your
data disk. Select the drive that contains the
outline you want. (Command key S)
* ENTER (hard disk systems only): ThinkTank will ask
you to enter the name of your outline file. You
must prefix it with the PASCAL device number or
volume name of your data disk, but you need not en-
ter the ThinkTank outline suffix .DB. (Command key
E)
* LAST: ThinkTank loads in the last outline you
worked with if it’s in the same drive. (Command key
L)
* ESCAPE: Cancels the ptocess of selecting an ex-
isting file and returns to the FILES Command Menu.
(Command key ESC)
See the reference guide listing under each option for further
information.
If the outline is not stored on a hard disk, insert your
data disk in any free drive. Tell ThinkTank how to find it by
selecting an option from the EXISTING FILE Menu. In a few
seconds you will see the outline in the Text Area.
—137—