Filter
Top Products
Error Messages
1. Make a copy of the outline disk, following the in-
structions in Appendix C of this manual.
2. Port as much of the outline as possible to a text
file.
3. Use the FILES/NEW command to create a new outline
and port in the text file you created in Step 2.
4. Examine the outline to make sure it’s intact. Recon-
struct any missing pieces with your most recent
backup.
If you have any trouble, contact Living Videotext for help.
Note the state of the outline and what you were doing when the
error occurred.
If the internal error is not 112, try the operation
again. If ThinkTank had trouble reading from a disk, it may
succeed the second tine. You may have to reset your computer
and start up the program again.
If the error recurs, write down the internal error number
and note the state of the outline and what you were doing when
the error occurred. Please report this information to Living
Videotext as soon as possible.
Memory Full!
Where It May Occur: EXPAND and other commands
Possible Causes: The expanded parts of your outline have
filled up the allotted space in your computer s internal memory.
Suggested Solutions: Use the COLLAPSE command to com-
press (hide) a portion of the outline that you don’t currently
need to see. You may re—expand the collapsed portion later if
you wish —— provided you first make room in memory by collaps-
ing some other part of the outline. We recommend using the
PERCENT command to monitor your use of computer memory.
—207-