Filter
Top Products
ThinkTank Manual
2. Unformatted disk. Your data disk is not formatted
for the PASCAL operating system. Suggested solu-
tion: Format the disk as described in Appendix C.
3. Write—protected disk. The write—protect notch on
your data disk is covered by a tab, preventing Think—
Tank from storing information on it. Suggested
solutions: If it’s OK for ThinkTank to erase any in-
formation on the disk, remove the tab. If it’s not,
use a different disk.
4. Incorrect device. The file name you entered was not
correctly prefixed by the PASCAL device number or
volume name of the data disk. Suggested solution:
Identify the device on which the file will be
created. For a review of PASCAL devices, see Appen-
dix B.
5. Insufficient space. Your data disk does not have
enough unused space to create the file. Suggested
solutions: You may (a) allocate a smaller number of
blocks to the file; (b) remove or transfer files
from your data disk; or Cc) use a disk with more
free space.
6. Duplicate name. Your data disk already contains a
file with the name you entered. In this case, Think—
Tank displays the message:
FILE EXISTS, REMOVE IT?
PRESS “Y” FOR YES, “N” FOR NO
Suggested solutions: If you want ThinkTank to
replace the existing file with the new one, type Y.
If you want to retain the existing file, type N and
give the new file a different name.
—198—