Filter
Top Products
Signal Descriptions
A-8 Copyright © 2001-2003. All rights reserved. ARM DUI 0163B
A.4 Logic analyzer connector
A Mictor-type logic analyzer connector is provided. It connects to the B[31:0] signals
used for GPIO B. If particular signals must be connected to a logic analyzer, the FPGA
configuration can be changed to reassign the signal connections.
Caution
If the FPGA configuration is changed to reassign signal connections, the GPIO B
connections on connector J16 also change.
Figure A-4 shows the pin numbers of this type of connector.
Figure A-4 J7 pin locations
1
37
2
38