Filter
Top Products
Advanced Management
Page 4-10
To access the Security Management Menu, type t in the Configuration
Menu.
A screen similar to Figure 4-3 appears.
Figure 4-3 Security Management Menu
Current Settings
The following settings are displayed in the Security Management Menu
screen.
Table 4-3 Security Traps
I Important! For any traps (alerts) to be sent, you must des-
ignate one or more devices as trap receivers. See “SNMP
Configuration” in Chapter 3.
Setting Description
Duplicated IP Monitoring Sta-
tus
Whether duplicated IP monitoring (detection) is cur-
rently enabled or disabled.
Duplicated IP Trap Status Whether duplicated IP trap is currently enabled or dis-
abled.
Station Movement Trap Status Whether station movement trap is currently enabled or
disabled.
IntraCore 8000 Security Management Menu
Duplicated-IP Monitoring Status: Enable
Duplicated-IP Trap Status: Enable
Station Movement Trap Status: Disable
<Cmd> <Description>
p Port Security Configuration
d Toggle Duplicated-IP Detection Enable/Disable
i Toggle Duplicated-IP Trap Enable/Disable
l Display Duplicated-IP List
s Toggle Station Movement Trap Enable/Disable
r Reset All Security Configuration to Factory Default
q Return to previous menu
Command> p