Filter
Top Products
Security Management
Page 4-15
1 From the Configuration Menu, type t to access the Secu-
rity Management Menu.
2 Type p to access the Port Security Configuration Menu,
as shown in Figure 4-5.
3 Select u to Set/Clear port security.
4 Type s to set security.
5 Type the numbers of the ports for which you want to set
the security. You can specify a single port, a series of port
numbers separated by commas, a range of ports shown
with a hyphen, or a combination of ranges and single
ports. For example, you can type 1-8, 14 to specify ports
one through eight, and port fourteen. See help for more
information.
6 Type 1 for Port Security Level 1.
To enable New Node detection:
1 From the Configuration Menu, type t to access the Secu-
rity Management Menu.
2 Type p to access the Port Security Configuration Menu,
as shown in Figure 4-5.
3 Type t to choose Toggle Port Security Trap.
4 Type 1 to toggle the new node trap (if it is not already
enabled).
Configuring Port Lock and Intruder Lock
The port intruder security measure allows you to create a port-trusted MAC
address which is allowed to direct traffic to the port. Attempts to send traffic
to the port from other stations are regarded as security intrusions, and can be
disallowed. The security measure may be enabled as a port lock (security
level 2) or an intruder lock (security level 3).