Filter
Top Products
SNMP and RMON Management
Page 4-7
Use the following procedure to set the STP Port Priority and Path Cost
values.
1 Access the Spanning Tree Port Configuration Menu by
typing p in the Spanning Tree Configuration Menu.
2 Use the m, x, and v commands to select the module with
the port you want to configure.
3 Use the s, n, and p commands to select the port you want
to configure.
4 Type i to set the Port Priority.
Type c to set the Port Path Cost.
5 Enter a value for the setting you are making.
6 Press Return.
The new Port Priority or Port Path Cost is displayed in the Spanning Tree
Port Configuration Menu.
SNMP and RMON Management
The Simple Network Management Protocol (SNMP) may be used to manage
the IntraCore 8000. The SNMP agent supports database objects that are
defined in the following management information bases (MIBs):
G MIB II (RFC 1213)
G Bridge MIB (RFC 1493)
G RMON (RFC 1757) 4 groups - Ethernet Statistics, Ethernet His-
tory, Alarm, and Events (See next section for details)
G Private Asanté 9000 MIB
Any SNMP-based network management application can be used to manage
the IntraCore 8000. For information on management of switches, refer to
your SNMP software manual.
For details on console-based SNMP settings, see “SNMP Configuration” in
Chapter 3.