Filter
Top Products
Advanced Port Configuration
Page 3-29
Current Settings
The settings shown in the top portion of the Advanced Port Configuration
Menu are described in Table 3-8.
Table 3-8 Advanced Port Configuration Menu settings
Setting the Maximum Broadcast or Multicast Rate
Use the following procedure to set a limit on how many packets may be
either broadcast or multicast from the current port.
1 Access the Port Configuration Menu by typing p in the
Configuration Menu.
2 Choose a module in the System Module Map.
3 In the Basic Port Configuration Menu, type a to open the
Advanced Port Configuration Menu.
Setting Description
Module Number The number of the module of which the selected port is a mem-
ber.
Module Type Code for the type of module: 24-100TX, 2-GBIC, or 8-100FX.
See Figure 3-9 for the full names of each module type.
Operating Status This field displays status symbols for each of the current mod-
ule’s ports. For details, see the legend in Figure 3-11.
Flow Control The status of flow control for the current port.When enabled, it
allows you to control traffic and avoid congestion, such as when
the port is receiving too much traffic for the available buffer
resources.
Priority The priority ranking for the port regarding data transmission
during periods of peak or heavy on the traffic. Ports with higher
priority take precedence when there is traffic congestion.
Max. Broadcast Rate The maximum number of packets per second that can be broad-
cast by the current port to the network
Max. Multicast Rate The maximum number of packets that can be multicast to all or
selected ports on the network by the current port.