Filter
Top Products
Security Management
Page 4-13
Configuring Port Security
To access the Port Security Configuration Menu, type t in the Configuration
Menu to access the Security Management Menu, then type p to access the
Port Security Configuration Menu. A screen similar to Figure 4-5 appears.
Figure 4-5 Port Security Configuration Menu
Current Settings
The following settings are displayed in the Port Security Configuration
Menu screen.
Setting Description
Port Security Status Status of security for each port: enabled, disabled by setting, or
disabled in response to a security intrusion.
IntraCore 8000 Port Security Configuration Menu Module Type: [24-100TX/RJ45]
Module: 01 Port: 01
Module Port Security Info:
[+: Port Security Enabled, -: No Port Security, !: Port Disabled By Security]
Port Security Status: [01]-------- [09]-------- [17]-------- [25]XXXXXXXX
Port Security Type: [<none>]
Port New Node Detect Trap Status: [<none>]
Port Intruder Detect Trap Status: [<none>]
Port Trusted MAC Address: [<none>]
<Cmd> <Description>
u Set\Clear Port Security
t Toggle Port Security Trap Enable/Disable
i Insert/Modify Port Trusted MAC Address
d Display Port Intruder Nodes
h Port Security Help
q Return to previous menu
Command>
Select M
odule Next module Prev module Select port Next port Prev port