Filter
Top Products
Multicast Traffic Management
Page 4-47
Current Settings
Table 4-10 describes each setting on the Multicast Traffic Management
Menu.
Table 4-10 Multicast Traffic Management Settings
Enabling and Disabling GMRP
To enable or disable GMRP on the IntraCore 8000, from the Multicast
Traffic Management Menu, type g to toggle the status of system GMRP.
Enabling and Disabling IGMP Snooping
To enable or disable IGMP Snooping on the IntraCore 8000, from the
Multicast Traffic Management Menu, type i to toggle the status of IGMP
Snooping.
Enabling and Multicast Poliocy-based Quality of Service
To enable or disable QOS on the IntraCore 8000, from the Multicast Traffic
Management Menu, type p to toggle the status of QOS.
Displaying a Summary of Group Addresses
To display a list of multicast group addresses, from the Multicast Traffic
Management Menu, type d. A screen similar to Figure 4-19 appears.
Setting Description
Multicast Group
Address Count
The number of multicast group addresses in the forwarding
table.
GMRP Status Whether GMRP is enabled or disabled.
IGMP Snooping Whether IGMP Snooping is enabled or disabled.
Multicast Policy
[RSVP]-based QOS
Whether ‘RSVP]-based QOS is enabled or disabled.