Filter
Top Products
Configuration
Page 3-48
Figure 3-26 System Log Menu
2 Type d to display the current system log, as shown in
Figure 3-27.
Figure 3-27 System Log Summary
The system log displays any major system events that
have occurred on the IntraCore 8000. If no major events
have occurred, “System up” messages are displayed.
K Note: The system log holds a maximum of 64 entries.
3 Press any key to display the next page of System Log
information.
Clearing the System Log
Use the following procedure to clear all entries from the current System Log.
1 Open the System Log Menu by typing l in the Configura-
tion Menu.
IntraCore 8000 System Log Menu
<Cmd> <Description>
l Display System L
og
c C
lear System Log
q Return to previous menu
Command>
IntraCore 8000 System Log Summary
====================================================================
No. D: H: M: S Event
1. 000:00:00:00 Reset NVDB sections to factory default
2. 000:00:00:07 Spanning Tree Task Disabled
3. 000:00:32:53 Spanning Tree Task Enabled
4. 000:00:33:45 Spanning Tree Task Disabled
5. 000:00:41:11 Spanning Tree Task Enabled
6. 000:00:00:00 Reset NVDB section 0 to factory default
7. 000:00:32:51 Spanning Tree Task Disabled
8. 000:00:33:08 Spanning Tree Task Enabled
Q
uit Next Page