Filter
Top Products
Advanced Management
Page 4-32
that VLAN only, and all forwarding decisions for that VLAN are made by
consulting that table. When shared learning is enabled, a single forwarding
table is used by all VLANs that are members of the shared group. (For more
information, see “Independent vs. Shared Learning.”)
To enable shared learning for a VLAN, type v in the Advance Group Static
Configuration Menu. Then enter the index of the VLAN with which you
want to share. You can repeat this procedure to share with multiple VLANs.
To enable independent learning for a VLAN, type i in the Advance Group
Static Configuration Menu.
Inserting and Removing MAC Addresses
{{What does this do? What significance does inserting a MAC Address
have for a VLAN? Help was no help. Still waiting for this info... The docs
you sent me said nothing about inserting a MAC address, or single server/
multiple client.}}
To specify the MAC address for the station that {{what?}} for the VLAN,
type type m in the Advance Group Static Configuration Menu, then specify
the MAC address in the format xx:xx:xx:xx:xx:xx where xx is hexadecimal
number separated by a colon.
To remove the MAC address from the VLAN, type type r in the Advance
Group Static Configuration Menu, then specify the MAC address.