Filter
Top Products
Page B-1
B
MIB Statistics
MIB Object Definitions for Counters
The following MIB objects are those for which counters are displayed in the
Statistics Counters screens shown in both the console and Web interface.
The definitions and references are quoted from RFC 1516.
Readable Frames
"This object is the number of frames of valid frame length that have been
received on this port. This counter is incremented by one for each frame
received on this port whose OctetCount is greater than or equal to
minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3
Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not
asserted.
This statistic provides one of the parameters necessary for obtaining the
packet error rate. The approximate minimum time for rollover of this counter
is 80 hours."
Reference: IEEE 802.3 Rptr Mgt, 19.2.6.2, aReadableFrames
Readable Octets
"This object is the number of octets contained in valid frames that have been
received on this port. This counter is incremented by OctetCount for each
frame received on this port which has been determined to be a readable
frame (i.e., including FCS octets but excluding framing bits and dribble
bits).
This statistic provides an indicator of the total data transferred. The
approximate minimum time for rollover of this counter is 58 minutes."
Reference: IEEE 802.3 Rptr Mgt, 19.2.6.2, aReadableOctets
FCS Errors
"This counter is incremented by one for each frame received on this port
with the FCSError signal asserted and the FramingError and CollisionEvent
signals deasserted and whose OctetCount is greater than or equal to