Filter
Top Products
Configuration
Page 3-12
Loading Software Locally
The IntraCore 8000 will always boot locally unless you set it to boot load
remotely. It would then download the new image code and reset to load
locally.
1 Open the Bootstrap Configuration Menu by typing b in
the Configuration Menu.
2 Type a in the Bootstrap Configuration Menu if you need
to toggle the Boot Bank setting for the next boot. Typi-
cally, you will want to set the boot bank to be the one on
which the latest version of the Image resides.
The IntraCore 8000 is set to load software locally from its flash memory.
This occurs whenever the unit is powered on or reset.