Filter
Top Products
Port Configuration
Page 3-19
Deleting a Trap Receiver
Use the following procedure to delete a trap receiver you have previously
designated.
1 Open the SNMP Configuration Menu by typing n in the
Configuration Menu.
2 Type d to Delete a Trap Receiver. A prompt for the entry
of the trap receiver appears.
3 Enter the number of the entry you want to delete (1,2,3,
or 4) and press Return.
The trap receiver is deleted from the SNMP Trap Receivers list.
Port Configuration
The Port Configuration Menu allows you to manually configure each of the
IntraCore 8000’s ports for port speed, duplex, and auto-negotiation. It also
provides an overview of the entire IntraCore 8000 system’s port operating
status.
To access the Port Configuration Menu, type p in the Configuration Menu. A
System Module Map screen similar to Figure 3-9 appears.
Figure 3-9 System Module Map screen
Choose the module for which you want to see a Port Configuration Menu. If,
for example, you chose slot 1, you would see a screen similar to Figure 3-10.
System Module Map
=================
Please select one of the following slots
Slot Description (Module Type)
---- --------------------------------------
1 24 10/100BaseTX ports Module (24-100TX)
2 2 1000BaseX ports Module (2-GBIC)
3 24 10/100BaseTX ports Module (24-100TX)
4 2 1000BaseX ports Module (2-GBIC)
5 <none>
6 <none>
7 <none>
8 <none>
9 <none>
Enter Module Number (1-8)>