Filter
Top Products
Multicast Traffic Management
Page 4-49
Adding ports to the Selected Address
To add or delete ports belonging to the multicast group:
1 Select the VLAN that contains the ports and the address.
Type v and follow the instructions.
2 Select the Multicast Group address. Type s and follow the
instructions.
3 Type o and follow the instructions.
Inserting a Multicast Group Address
Inserting an address adds the address to the list of Multicast Groups for the
current VLAN. The addresses begin 01:00:5e. The remaining 24 bits are the
lowest 24 bits of the IP multicast address.
To add an address:
1 Select the VLAN to which you will assign the new
address. Type v and follow the instructions.
2 Type i and follow the instructions to add the new address.
Removing a Multicast Group Address
To remove an address:
1 Select a VLANfrom which you will remove the address.
Type v and follow the instructions.
2 Type r and follow the instructions to remove the address.