Asus TS300-E5 Server User Manual


  Open as PDF
of 218
 
ASUS TS300-E5 5-21
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-bit
operating system. Conguration options: [Disabled] [Enabled]
DRAM Frequency [Auto]
Allows you to set the DDR operating frequency.
Conguration options: [Auto] [667 MHz] [800 MHz]
CongureDRAMTimingbySPD[Enabled]
When this item is enabled, the DRAM timing parameters are set according to the
DRAM SPD (Serial Presence Detect). When disabled, you can manually set the
DRAM timing parameters through the DRAM sub-items.
Conguration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Conguration options: [PCI/PEG] [PEG/PCI]
PEGPortConguration
PEG Port [Auto]
Conguration options: [Auto] [Disabled]
SouthBridgeConguration
SMBUS Controller [Enabled]
Allows you to enable or disable the SMBUS Controller.
Conguration options: [Enabled] [Disabled]
SLP_S4# Min. Assertion Width [1 to 2 seconds]
Allows you to select the SLP_S4# Min. Assertion Width.
Conguration options: [4 to 5 seconds] [3 to 4 seconds] [2 to 3 seconds]
[1 to 2 seconds]
SouthBridgechipsetConguration
SMBUSController [Enabled]
SLP_S4#Min.AssertionWidth[1to2seconds]
BIOS SETUP UTILITY
Advanced
 previous next