Filter
Top Products
2-33ASUS TS300-E5
2.10.3 SATA/SAS backplane
To remove the SATA/SAS backplane:
1. Remove the HDD blower case.
Refer to section 2.10.2 HDD
blower for instructions.
2. Disconnect all cables from the
SATA/SAS backplane.
When disconnecting a cable,
hold and rmly pull the cable
plug. DO NOT pull the cable
itself. Doing so may damage the
cable!
4. From the inner edge, push the
backplane outward so that the outer
edge protrudes slightly from the slot.
5. From the outer edge, rmly hold the
backplane and carefully slide it out.
3. Remove the 2 screws on the backplane.