Filter
Top Products
Chapter 2: Hardware setup2-34
To reinstall a SATA/SAS backplane:
1. Position the backplane into its slot
with the component side facing
the rear panel, and the power
connectors on top.
2. Align the backplane with the rail-like
dents on the slot to ensure that it ts
securely.
3. Slide the backplane into the slot
until it ts. If correctly installed, the
outer edge of the backplane aligns
with the corner of the drive cage.
4. Fasten the 2 screws on the
backplane.
5. Connect the appropriate cables
to the backplane. Refer to section
2.9.2 SATA/SAS backplane
connections for details.
Rail-like dents