Asus TS300-E5 Server User Manual


  Open as PDF
of 218
 
7-6
Chapter 7: Driver installation
7.1.3 Installing the RAID controller driver (for PA4 Model)
Windows
®
Server
During Windows
®
Server installation
To install the RAID controller driver when installing Windows
®
Server:
1. Boot the computer using the Windows
®
Server installation CD.
2. Press <F6> when the message “Press F6 if you need to install a third
party SCSI or RAID driver...” appears at the bottom of the screen.
3. When prompted, press <S> to specify an additional device.
5. Do one of the following actions:
• On a Windows PC – Type rawrite.exe to extract the driver image le to
the blank diskette.
• On a Linux PC – Type dd if=<imageFileName> of=<oppyDeviceName>
bs=10k to extract the driver image le to the blank diskette.
Where <imageFileName> is the driver image le name and
<oppyDeviceName> is the device name, such as /dev/ fd0.
S=SpecifyAdditionalDeviceENTER=ContinueF3=Exit
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
diskcontrollersforusewithWindows,includingthosefor
whichyouhaveadevicesupportdiskfromamassstoragedevice
manufacturer, press S.
*Ifyoudonothaveanydevicesupportdisksfromamassstorage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
 previous next