Asus TS300-E5 Server User Manual


  Open as PDF
of 218
 
6-48
Chapter 6: RAID conguration
By default, the RAID Disk eld shows No before array creation. This eld is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID array.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
4. Repeat step 3 to add the other disks to the volume.
5. When done, press <C> to create the array, then select Save changes then
exit this menu.
6. The utility creates the array.
Createandsavenewarray?
CancelExit
Savechangesthenexitthismenu
Discardchangesthenexitthismenu
ExittheCongurationUtilityandReboot
LSICorpCongUtilityv6.20.00.00(2007.12.04)
Processing...maytakeupto1minute
Creating RAID array...
 previous next