Asus TS300-E5 Server User Manual


  Open as PDF
of 218
 
6-18 Chapter 6: RAID conguration
6.2.4 Initializing the logical drives
After creating the RAID set(s), you must initialize the logical drives. You may
initialize the logical drives of a RAID set(s) using the Initialize or Objects
command on the Management Menu.
Using the Initialize command
To initialize the logical drive using the Initialize command:
1. From the Management Menu, highlight Initialize, then press <Enter>.
2. The screen displays the available RAID set(s) and prompts you to select the
logical drive to initialize. Use the arrow keys to select the logical drive from
the Logical Drive selection, then press <Enter>.
LSILogicSoftwareRAIDCongurationUtilityVerA.51Aug13,2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
CheckConsistency
Initialize Logical Drive(s)
LSILogicSoftwareRAIDCongurationUtilityVerA.51Aug13,2007
SPACE-(De)Select,F10-CheckConsistency
Management Menu
Congure
Initialize
Objects
Rebuild
CheckConsistency
Select VD
LogicalDrive(s)Congured
LD RAID Size #Stripes StripSz Status
0 10 154494MB 4 64 KB ONLINE
Logical Drives
Loical Drive 0
 previous next