Filter
Top Products
Chapter 2: Hardware setup2-28
2. Locate the four screws that secure
the fan to the chassis.
3. Remove the four screws while
carefully supporting the system fan
with your free hand to prevent it
from falling off.
Set the screws aside.
2.10.1 System fan
To remove the system fan:
1. Unplug the system fan cable from
the FRNT_FAN2 connector on the
motherboard.
2.10 Removable components
You may need to remove previously installed system components when installing
or removing system devices, or when you need to replace defective components.
This section tells how to remove the following components:
4. Carefully remove the system fan.
1. System fan
2. HDD blower (optional)
3. SATA/SAS backplane
4. Floppy disk drive module
5. Front I/O board
6. Chassis footpads and roller
wheels
7. Power supply unit