Asus TS300-E5 Server User Manual


  Open as PDF
of 218
 
6-53
ASUS TS300-E5
Managing hot spares
You may congure one disk as a global hot spare to protect critical data on the IM/IME
volume(s). You may create the hot spare disk at the same time you create the IM/IME
volume. Refer to this section when adding a hot spare disk on an existing volume.
If a disk on an IM/IME volume fails, the utility automatically rebuilds the failed
disk data on the hot spare. When the failed disk is replaced, the utility assigns
the replacement as the new hot spare.
To create a hot spare:
1. Follow steps 1–3 of the section Viewing volume properties.
2. From the View Array screen, select Manage Array, then press <Enter>.
3. From the Manage Array screen, select Manage Hot Spares, then press
<Enter>.
Esc=ExitMenuF1/Shift+1=Help
Enter=SelectItemAlt+N=NextArrayC=Createanarray
LSICorpCongUtilityv6.20.00.00(2007.12.04)
View Array -- SAS1064E
Array 1 of 1
IdentierLSILOGICLogicalVolume3000
Type IME
Scan Order 0
Size(MB)51498
Status Optimal
Manage Array
SlotDeviceIdentierRAIDHotDrivePredSize
Num DiskSprStatusFail(MB)
0 SEAGATEST336754SS0003YesNoOkNo34331
2 SEAGATEST336754SS0003YesNoOkNo34331
3 SEAGATEST336754SS0003YesNoOkNo34331
Esc=ExitMenuF1/Shift+1=Help
Enter = Select Item
LSICorpCongUtilityv6.20.00.00(2007.12.04)
Manage Array -- SAS1064E
IdentierLSILOGICLogicalVolume3000
Type IME
Scan Order 0
Size(MB)51498
Status Optimal
Manage Hot Spares
Synnchronize Array
Activate Array
Delete Array
 previous next