Asus TS300-E5 Server User Manual


  Open as PDF
of 218
 
6-10 Chapter 6: RAID conguration
UsingNewConguration
When a RAID set is already existing, using the NewConguration command
erases the existing RAID conguration data. If you do not want to delete the
existing RAID set, use the View/AddConguration command to view or create
another RAID conguration.
To create a RAID set using the NewConguration option:
1. From the utility main menu, highlight Congure, then press <Enter>.
2. Use the arrow keys to select NewConguration, then press <Enter>.
3. Follow steps 3 to 7 of the previous section.
4. Select Size from the Logical Drive menu, then press <Enter>.
5. Key-in the desired logical drive size, then press <Enter>.
6. Follow steps 8 to 13 of the previous section to create the RAID set.
LSILogicSoftwareRAIDCongurationUtilityVerA.51Aug13,2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
CheckConsistency
ClearExistingCongurationAndStartANewConguration
CongurationMenu
EasyConguration
NewConguration
View/AddConguration
ClearConguration
Select Boot Drive
LSILogicSoftwareRAIDCongurationUtilityVerA.51Aug13,2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
CheckConsistency
LogicalDrive(s)Congured
LD RAID Size #Stripes StripSz Status
0 1 77247MB 2 64 KB ONLINE
RAID = 1
Size = 77247MB
DWC = Off
RA = On
Accept
SPAN = NO
Enter VD Size (MB):
Enter VD Size (MB): 77247
 previous next