Filter
Top Products
Chapter 3: Installation option3-2
4. Locate two round mylars on top
cover.
5. Carefully remove each mylar using
a sharp, at object such as the
edge of a cutter.
3.1.2 Removing the top cover
To remove the top cover
1. Remove the chassis cover. Refer to
section 2.1.1 Removing the side
cover.
2. Remove the front panel assembly.
Refer to section 2.5.1 Removing
the front panel assembly.
3. Carefully slide out the protruding
portion of the top cover as shown.
3
3.1 Preparing the system for rack
mounting
• The items required for the optional congurations described in this chapter
are not included in the standard barebone system package. These items
are purchased separately.
• We recommend that you allot at least 1U space above the server system to
ensure optimal thermal performance.
3.1.1 Removing the footpads or roller wheels
Refer to section 2.10.6 Chassis footpads and roller wheels for instructions on
removing the footpads or roller wheels.